Month: February 2018

Heart-shaped Lights for Valentine’s Day

Heart-sharped bokah, bokeh, blown out background, blurry background.
Let’s get romantic with some heart-shaped lights this Valentine’s Day

 

Heart-sharped bokah, bokeh, blown out background, blurry background.
Directions are below.
IMG_1441
A heart stamp from the craft store makes a nice heart.
IMG_1442
Grab a piece of black construction paper.  Cut it into this basic shape.  The circular shape should cover your lens opening.      Notice that the heart shape has been taped to the center.  That’s because my stamp doesn’t stamp very far from the edge of the paper.  I had to cut the center out of the main shape and tape a smaller piece of paper with the heart shape to the main piece. (This is good because you can remove the heart later and add shamrocks for St. Patty’s Day)

 

IMG_1443
Attach the black paper object to the front of your lens.  I use a hair tie. 
IMG_1444
You’re almost ready to go.  I’ve found that a lens in the 100mm range makes the best heart shapes.
IMG_1445
Switch to Manual focus.  Blur the scene in front of you.                  The view through the viewfinder is dark.  It might help to switch the camera to spot or partial metering.
Heart-sharped bokah, bokeh, blown out background, blurry background.
Bright lights work best.  This is a photograph is a busy street.  

Flashing Red Light On Canon Rebel

Question from a reader:  I was taking photos yesterday of my daughter at a gymnastics event.  A red light in the bottom right corner on my Canon Rebel kept flashing.  Once I saw the word “BUSY” in the viewfinder.  What was I doing wrong?

The red flashing light on your camera shows that the camera is accessing the memory card.

It’s normal to see a red light when the camera takes a photo. (Nikon users see a green light.)  The light should quickly go on-and-off  if all is well.

During a rapid burst of photos, the red light will flash as long as the camera is moving the photos to the memory card.  The camera has a memory buffer of 6-9 photos.  It’s holding those in memory and waiting to move them photos to the card.

If you take 10 photos in a row, the camera moves some to the card and then some to the buffer. Those in the buffer wait in line until it’s time for them to move to the card.

You’ll see BUSY in the viewfinder if you take too many photos and the buffer fills.  The camera won’t take any more photos until the buffer clears out and has room to store another photo.

You’re likely to see the flashing red light and BUSY in the viewfinder if you held the shutter button down and took a lot of photos.  Those photos need to process out of the buffer and through to the card.

Solution — get a memory card that records faster.  How fast?  That depends on the camera.  A 20MB camera that takes 7 fps (frames per second) is going to record 140MB worth of photos per second.  A card that records 64MB per second can record roughly three frames a second.  The other four frames are going to sit in memory.  That means you have three frames recording to the card while four photos are waiting in buffer.  That’s usually okay since the buffer will clear in a second or two.

This card records 150MB/s. That’s seven photos per second using a 20MB camera.
This card records 45MB/s. That’s two photos per second using a 20MB camera.

 

The card on the left records 150MB/s.  That’s seven photos per second using a camera with a 20MB file.  This is almost more card than the Rebel needs.  Someone who shoots sport or action regularly might need this, though.

The card on the right records 45MB/s.  That’s two photos per second using the same camera.  Too slow for someone photographing sports or action.

The card you need depends on what you photograph and what camera you use.  I get my cards from Hunt’s Photo and Video.  Ask for Alan Samiljan (781) 462-2383 or email him at asamiljan@huntsphoto.com    His hours are Monday, Tuesday, Thursday & Friday, 8:30-5:00pm eastern

%d bloggers like this: