I had the pleasure of using the Singh-Ray Filter 830 Infrared Filter during my recent photo tour to Ireland. It was great to get to play with the filter and use it in a variety of settings.
(Please see my previous posts on Singh-Ray Infrared Filters. Canon users need to use the 830. Nikon users can use either but Canon cameras need the 830.)
All the images below are 240 second exposures, ISO 400-800, and f/stop of f/9 to f/22. In my experimentation, I’ve learned that you start with one exposure as above. Take the photo and then check the histogram. More exposure is needed if the histogram doesn’t hit the right side. Less exposure is needed if the histogram spikes up the right side. Be prepared for some trial and error.
Please read my previous posts on using this filter. It is a great tool and could be just what you need to add a bit of creativity to your photography.
I love infrared photos but somehow I never seemed to get around to having an old camera converted to infrared. So earlier this year I got an email ad from Singh-Ray Filters advertising their infrared filter. My hand grabbed my computer mouse without my will and order the filter. Before I knew it, Singh-Ray’s IR 690 filter was heading to my doorstep.
The filter arrived, I read some articles online, and then went out to give it a try. The photos came out RED. Yep, they were red but they were supposed to be red.
The articles I read said that the photos out of the camera would be red. I was then supposed to process with method #1, method #2, or method #3 to get an infrared image.
I tried all the methods and simply had a black-and-white image. No snowy-white grass or grass that look so great in infrared photos. I could never get anything that even remotely looked like infrared.
Out of frustration, I sent an email to the folks at Singh-Ray Filters. I got an immediate response and they put me in touch with one of their experts. That man and I exchanged photos and emails for the next two weeks. I shot photos with the filter, processed them per his instructions, but nothing worked. He paid for me to ship my filter to him so he could use it on his camera.
In the end, we found that my Canon 5D Mark IV and my Canon Rebel need a Singh-Ray 830 Infrared filter. The IR 690 filter only yields a black-and-white image after processing.
Mystery solved. Singh-Ray Filters immediately shipped me an 830 Infrared Filter and issued a credit for my 690 IR filter once they received it.
Thanks to the great customer service at Singh-Ray Filters I’m now shooting infrared photos and loving my 830 Infrared filter.
By the way, the IR 690 filter works fine on Nikon camera. We found this situation only applies to Canon cameras.
Here’s how to take a photo with the 830 Infrared Filter:
Set the camera to the Bulb exposure mode and decide which f/stop you’ll use.
Frame the shot and focus the lens.
Turn off auto-focus on the lens.
Screw the filter on the lens without moving the focus ring.
You can’t see through the IR filters.
With the camera in Bulb
Take the photo with the shutter open for about 4-minute.
Adjust based on the histogram. A bit less time if the photo is too bright or a bit more time if the photo is too dark.
Here’s my method for processing photos taken with the 830 Infrared Filter:
Open in Adobe Camera Raw or Lightroom
Open Hue Saturation Luminance
Move the red Luminance slider all the way to the right
Move the red Saturation slider all the way to the left
This gets rid of the red cast to the photo
Go back to the Basic Tab
Move the Exposure slider so the histogram hits the right corner
Move the Black slider so the histogram hits the left corner
Add some Contrast
Continue processing to taste
I’ve just begun shooting in infrared and processing those photos. Stay tuned. More discoveries in store.